Yes, once installed correctly. SlatWall Pro's HydroGuard surface is 100% waterproof and built for bathrooms, kitchens and other wet-prone rooms, residential or commercial. The key installation detail: silicone needs to go into the tongue-and-groove joins between panels, and along the top and bottom of the run, that's what stops moisture reaching the core once everything's fixed in place. Skip that step and the panel itself handles water fine, but the join lines won't. It's a popular choice for shower walls, kitchen splashbacks and commercial wet areas where a real timber panel wouldn't hold up. Browse our bathroom wall panels for more wet-area options, or order a sample first to check the finish against your fittings.

Lite is the budget-friendly option, fully waterproof and a great fit for most residential jobs, but built to a lighter spec: thinner slats, no fire rating, and less print variation across panels. SlatWall Pro steps up on all three, it's commercial-grade, has a Group 1 fire-rated option, and uses noticeably more print variation so the timber look reads as natural across a full wall rather than obviously repeated. Pro costs more per box, though Lite's larger box size means Lite actually works out cheaper per square metre overall, roughly half the price of Pro for the same coverage. If your project needs commercial certification or the most realistic finish available, Pro is the one to choose. For a straightforward residential refresh on a budget, SlatWall Lite is worth a look instead.

Each colourway offers a standard box and a Group 1 fire-rated box as separate purchase options at checkout, the fire-rated version costs more due to the additional testing and materials involved. The Group 1 classification itself is assigned under AS 5637.1:2015 (clause 4.2), based on full-scale room testing carried out to AS ISO 9705-2003 (R2016), SGS test report CZFTS25000239R01_EN confirms this for our 18mm SlatWall Pro panel. If your preferred colour doesn't show the fire-rated option in stock, get in touch, we can often source it or advise on lead times for a custom order.

Yes, as long as it's not exposed to direct sunlight or the weather. The timber look comes from a high-definition print rather than natural pigment, so direct sun will fade it over a few years the way it would any printed finish. Covered, shaded outdoor areas, alfresco ceilings, undercover entertaining spaces, verandas, are a different story, the waterproof HydroGuard surface handles moisture and humidity without any trouble. It's a popular choice for exactly this kind of semi-outdoor space, since it gets the timber look without the maintenance real timber cladding needs in a damp, shaded spot. Just keep it out of full sun and off anything genuinely exposed to the elements.

Yes, it's built for exactly that. The panels are structurally rated to hold over 2000kg per square metre and are wrapped in a wear layer that resists scuffs and impact, tough enough that you can walk directly on a sample panel without it warping. Add the Group 1 fire-rated option and SlatWall Pro covers most of what a commercial fit-out needs: durability, moisture resistance and fire performance in one panel. It's used across cafes, restaurants, bars, offices and showrooms as well as homes, so it's designed to hold up under more daily wear than a typical residential feature wall would see. For a specific commercial project, we're happy to talk through fire rating and quantity requirements directly.

It's not real timber, it's a composite panel with a high-definition printed surface designed to replicate it. Where most waterproof composite panels use a single flat colour or a repeating print, SlatWall Pro uses significantly more print variation, so the grain, knots and colour shifts you'd expect from a real board show up across the panels instead of looking obviously repeated. It's finished with a 0.2mm HydroGuard wear layer on top, which is what makes it waterproof and scuff-resistant in a way real timber veneer can't be without ongoing upkeep. If you're deciding between a genuine timber veneer panel and a printed waterproof one, our blog on the difference walks through what to expect from each, worth a read before choosing between this and a range like Acouwood®.

Installation follows the same simple pattern as the rest of our range: measure the wall, cut to size with a saw (a standard handsaw is fine), and glue on with FastGrab adhesive. Tongue-and-groove edges keep panels aligned as you go, and any open ends, tops or bottoms need a bead of silicone to keep the waterproofing intact at the joins. For cut edges or open ends that stay visible, like a window reveal or an outside corner, a colour-matched finishing trim clips over the join for a factory finish. Everything you need, adhesive, silicone and trims, is in our accessories range. Full step-by-step instructions, including the waterproofing steps, are in our installation guide.

Yes, and it's one of the more popular uses for this range. Each panel is lightweight by design, so a full ceiling doesn't add unnecessary load to the structure above it, and the same waterproof surface means steam from a bathroom or kitchen ceiling isn't a concern either. Installation is the same as a wall: measure, cut, glue in place, just working overhead rather than vertically, which is really the only extra consideration. Alfresco ceilings, bathroom ceilings and feature ceilings in living spaces are all common applications.

Very. The wear layer resists scuffs, scratches and everyday knocks, and structurally the panels can hold over 2000kg per square metre despite being lightweight and hollow, well beyond what a normal wall or ceiling application would ever need. In practice that means it stands up to knocks from furniture, pets, foot traffic in a hallway, or general household wear without showing damage the way a softer surface might. It's part of why the range works as well in cafes and offices as it does in a home, the finish is built to keep looking new under regular use, not just gentle handling.

About as low-maintenance as a wall panel gets. Because the surface is fully sealed, dust, grease and everyday grime wipe off with a damp cloth, no special products or sealing top-ups needed. There's no lacquer to reapply and no timber to oil, the waterproof surface does the work on its own. Keep it out of direct, prolonged sunlight to avoid fading over time, and avoid abrasive cleaners that could dull the wear layer, otherwise it's a wipe-down job rather than a maintenance routine.