Quite a lot, honestly. These battens are built for exterior architectural detailing wherever you want clean, natural-looking lines outdoors: privacy screens, façades, boundary features, entryways, alfresco areas, pergolas, planter boxes, and even as a cladding substructure. Because they install vertically or horizontally with adjustable spacing, they suit a full screening wall just as easily as a subtle accent along an entryway or fence line. Both residential and commercial projects are a genuine fit here, so whether you're screening a side courtyard at home or detailing a café façade, the same batten does the job. If you're picturing a specific application and want a second opinion on spacing or layout, get in touch and we can talk through your project.

Yes, and that's really the whole point of building them from WPC (wood-plastic composite) with a fully protective capping layer rather than solid timber. They resist moisture, UV fading, insects and rot, the kind of damage that eventually catches up with real timber outdoors no matter how well you maintain it. There's no oiling, sanding or painting required, ever, the finish is built in rather than applied on top. That's a genuinely different maintenance reality to a timber batten, which needs regular attention to keep looking good and stay structurally sound outdoors.

Composite battens have become a genuine category in Australia now, with several brands offering similar WPC or PVC-composite profiles built for the same basic job: a timber look outdoors without timber's ongoing upkeep. Where Outdoor Batten holds its own is in the fundamentals that matter most for a screen or façade: a fully capped WPC core, resistance to moisture, UV, insects and rot, and zero oiling, sanding or painting over its lifetime. A 3.6m single length also means fewer joins across a run than some shorter profiles on the market. The differences between composite batten products generally come down to exact profile size, colour range and price point, so if you're comparing options, it's worth lining up the specs side by side rather than assuming they all perform the same.

Yes, every colourway is priced the same at $45 per 3.6m length, White, Tasmanian Oak, Walnut, Black, Blackbutt and Teak, so it comes down to which tone suits the space rather than budget. White reads crisp and contemporary against a rendered façade, while timber tones like Tasmanian Oak or Teak lean warmer and blend naturally into a garden or timber-heavy exterior, and Black makes more of a bold architectural statement. Since these sit outside where lighting shifts throughout the day, order a sample or two before committing to a full run, it's the easiest way to see how a tone actually reads against your own brickwork, render or landscaping.

They're built for different jobs. Outdoor Panel is a full cladding panel, designed to cover a wall or surface outright. Outdoor Batten is a single 60 x 40mm profile run to 3.6m, meant to be fixed individually onto a sub-frame with whatever spacing you choose between each piece, so you get a screened, slatted look rather than a solid clad surface. If you want full coverage and a seamless finish, Outdoor Panel is the one to reach for. If you're after that architectural screening effect, spaced battens letting light and airflow through, or a more custom, adjustable look, Outdoor Batten is the better fit.

They're made from wood-plastic composite (WPC), a core material with a fully capped protective coating over it, rather than solid timber. That capping layer is what gives the battens their resistance to moisture, UV fading, insects and rot without needing any coating, oil or paint applied afterwards. Each batten measures 60 x 40mm and runs a full 3.6m in length, which means fewer joins and a cleaner overall run across a screen, façade or fence line than you'd typically get from shorter timber lengths. It's a considered, low-maintenance way to bring the warmth of a timber look outdoors without timber's ongoing upkeep.

Battens fix onto a horizontal sub-frame, with supports spaced no more than 600mm apart. Pre-drill each batten with a 5mm bit at every point it meets the frame, then secure it with one screw per rail, we'd recommend the outdoor batten screw built for exactly this. For a clean, hidden-screw finish, drive the screw 8 to 10mm below the surface and tap in a colour-matched plug, or if you'd rather a visible fixing, drive it flush with the face instead. Both vertical and horizontal orientations work, and spacing between battens is entirely up to you and the look you're after.

Yes, spacing is entirely up to you, there's no fixed gap you're locked into. Tighter spacing gives more privacy and a fuller, more solid-looking screen, while wider gaps let more light and airflow through and read a bit more open and architectural. The battens are also flexible enough to run vertically or horizontally depending on the effect you're after, so between orientation and spacing there's a fair bit of room to tailor the finished look to your specific façade, screen or entryway.

With Outdoor Batten Capping, sold separately, and honestly worth adding to your order rather than an afterthought. It gives cut ends and exposed edges a clean, concealed finish rather than leaving the composite core visible, which matters most on a screen or façade where the ends are on show. If you're planning a full run across the Outdoor Batten range, it's the small addition that takes the finished look from "good DIY job" to properly professional.

About as low as outdoor maintenance gets. Because the WPC core is fully capped rather than left exposed, there's no oiling, sanding or painting required, ever, unlike a timber batten that needs regular upkeep to keep resisting the weather. A clean as needed, whatever that looks like for your spot, a wipe down or a hose-off if it's picked up dust or grime, is genuinely all it takes to keep it looking as sharp as day one.